New Orleans’ planned new Bourbon Street barriers only crash-rated to 16kmh
Sign up now: Get ST's newsletters delivered to your inbox
People on Jan 2 walking near older models of traffic bollards, which the city plans to replace, after 14 people were killed by a man driving a truck in an attack during New Year's celebrations in New Orleans.
PHOTO: REUTERS
Follow topic:
NEW ORLEANS - Months before the deadly New Orleans vehicle attack on New Year’s Day
Engineers found such a pick-up could enter the crowded tourist strip at speeds ranging from 12mph to 70mph (19kmh to 112kmh) – and yet city officials are now installing new street barriers that can withstand only 10mph (16kmh) impacts, according to an April city-contracted engineering analysis and city bid documents reviewed by Reuters.
Those new barriers, known as “bollards”, had not yet been installed on Bourbon Street on New Year’s Day but are planned to be completed by the Feb 9 National Football League Super Bowl in New Orleans.
The documents reviewed by Reuters, which have not been previously reported, make clear that the system will not be able to prevent vehicle attacks at moderate to high speeds.
In selecting the new bollard system, the city prioritised ease of operation over crashworthiness of the new system because of chronic problems in operating the old one, according to the documents and a source with direct knowledge of the city’s Bourbon Street security planning.
Unlike some pedestrian-only zones, such as in New York City’s Times Square, Bourbon Street is open to regular vehicular traffic for much of the day, requiring city officials to block parts of it off from surrounding streets each evening.
Since the New Year’s Day attack, New Orleans officials have faced scrutiny over whether they left citizens vulnerable as crews were removing old bollards and installing new ones. But neither barrier system would have prevented the deadly attack, according to the source and a Reuters review of the city documents.
The city currently has no bollards at Canal and Bourbon streets, where the attacker entered, but the roadway was blocked by an SUV police cruiser parked sideways on New Year’s Day.
Attack suspect Shamsud-Din Jabbar, a US combat veteran from Texas, exploited another vulnerability in the city’s security planning: He squeezed his seven-foot-wide (2.13m-wide) pick-up onto an eight-foot-wide (2.43m-wide) sidewalk between a drugstore wall and the police vehicle, stomping the accelerator and ploughing through the crowd at about 3.15am local time.
Jabbar died after the attack in a shootout with police. The federal authorities have said he had been radicalised and pledged allegiance to the ISIS militant group.
The city’s security modelling, in an engineering study conducted to help choose a new barrier system, had considered only scenarios where a vehicle entered Bourbon Street on the roadway – not the sidewalk.
A vehicle could not enter most Bourbon blocks on its skinny sidewalks, which have other existing barriers such as fire hydrants or balcony and streetlight posts, the source said.
City officials would face “tough meetings” about the continuing vulnerabilities of the new bollards being installed now, the person said, which “wouldn’t have made any difference” on New Year’s Day.
New Orleans city officials did not respond to detailed questions from Reuters about their Bourbon Street security planning and the decision to select barriers with a 10mph crash rating.
The person with direct knowledge of the city’s security planning emphasised the difficulty all cities face in protecting against vehicle attacks while preserving access to routine vehicular and pedestrian traffic, including accessible sidewalks for people with disabilities.
The source said officials chose a bollard system rated for 10-mph impacts from a company called 1-800-Bollards Inc. City bidding documents, dated in August and September, sought an installer of the system, calling it the “RCS8040 S10 removable bollard”. The city’s April engineering analysis describes the same product as having an “S10“ crash rating and explains it can stop a 5,000-pound (2,267kg) vehicle travelling at 10mph.
“Crash ratings are specified as S10 (10mph impact), S20 (20mph impact), and S30 (30mph impact),” the engineering analysis said.
The source said a barrier rated for 10mph impacts could still slow or significantly damage a vehicle travelling faster.
Representatives from 1-800-Bollards Inc declined to comment.
Two of the Bourbon Street attack scenarios modelled by city-contracted engineers involved entering the street in a straight line, without turning, after building up speed.
The study found that a 2015 F-150 could achieve a speed of 50mph by accelerating from the stoplight across Canal Street, a wide boulevard with streetcar tracks in the median. The same vehicle could hit 70mph entering from the opposite end of the section of Bourbon Street that is protected by bollards.
Jabbar drove a deadlier weapon than the truck used in the report’s scenarios – a newer F-150 Lightning, a much faster, heavier and quieter electric vehicle.
During major events such as New Year’s Day or Mardi Gras, the source said, city security plans call for parking large vehicles at the ends of Bourbon Street that are most vulnerable to high-speed vehicle attacks. But such measures, the person said, are not practical on a daily basis in the crowded tourist zone.
‘Bourbon street juice’
Since at least 2020, city officials have studied how best to replace New Orleans’ failing system of street barriers to protect against vehicle attacks, the source said.
The city installed its first bollard system after coming under pressure in 2017 from federal officials to protect Bourbon Street following a string of vehicle attacks globally, including one in 2016 that killed 86 people and injured hundreds in Nice, France.
New Orleans initially chose a system called the Heald HT2 Matador that allowed workers to move the barriers into position along tracks in the street, according to city documents. The source told Reuters the system was selected in large part because it had already been bid and priced by the federal government, allowing the city to install it faster.
But the barriers proved problematic under the rigours of Bourbon Street – and often inoperable because the tracks became jammed with litter, including Mardi Gras bead necklaces.
In addition, the mechanism to lock and unlock the barriers was embedded in the street and often became submerged in what the source called “Bourbon Street juice” – the mix of street grime, refuse, rainwater, spilled drinks and occasionally vomit that gives the tourist strip its signature stench.
“To unlock it, you have to dip your hand into Bourbon Street juice,” the person said. “It was a disgusting job. You couldn’t get anyone to do it.”
Heald, the maker of the bollards, said in a statement that they had not been shifted into place to block Bourbon Street before the attack, “and, therefore, did not malfunction”.
The system operates effectively, the company said, with “basic maintenance and cleaning”.
Lighter-weight bollards
Because of those problems, the city prioritised factors including ease of operation and maintenance over crash safety ratings in choosing a new system, according to the source and an April 2024 report from Mott MacDonald, an engineering firm hired by the city to evaluate dozens of bollard options.
Representatives of Mott MacDonald did not comment.
The report outlined three different crash-rating standards for bollard systems. It concluded that the highest crash rating, which could withstand impacts from 15,000-pound (6,800kg) vehicles travelling between 30mph and 50mph, was “not compatible” with the city’s needs to move the bollards every day.
“Specialised lifting equipment like a truck-mounted crane or heavy machinery would be necessary” to move such bollards daily, the report said.
The city chose the 1-800-Bollards Inc system with the 10mph rating, relatively lightweight stainless-steel posts that drop into street foundations, in part because the bollards could be installed and removed daily by a single city staffer, the source said. Those posts weigh 44 pounds (20kg), the engineering analysis said, whereas similar 20mph bollards weigh 86 pounds.
The same report included the attack-scenario modelling. In addition to those showing potential speeds of 50mph and 70mph, all other scenarios showed an F-150 could make turns onto Bourbon at between 12mph and 20mph without hitting a kerb or running onto a sidewalk – exceeding the 10mph crash rating of the system the city chose.
The source said the primary concern of city officials, along with French Quarter resident and business representatives, was protecting pedestrians from vehicles turning onto Bourbon from side streets at lower speeds.
The report scored different systems on various criteria. The system ultimately chosen by the city received a deduction in its “safety rating” score because it did “not meet the project requirements specified”.
It received higher marks for the weight of the bollards and their low costs. REUTERS
